Hull-Sight — Schedule Cleaning
on Data, Not the Calendar.
The decision layer for hull performance. Hull-Sight reads your operating data — routes, water temperature, biological conditions, and speed — and turns it into a clear, ship-by-ship fouling-risk picture. It also keeps every underwater inspection in one place, with automated reporting and AI image analysis.
The Question Isn't "Is My Hull Fouled?"
It's "Which One — and When?"
Across a fleet, hulls foul at very different rates. A ship idling in warm, biologically rich water for weeks is a different risk to one running fast on cold, open routes. Hull-Sight captures that difference for every vessel, continuously, so attention and budget go where they actually matter.
The platform converts raw operating data into decision-support — advanced ship-profile specifications layered over routing, sea-temperature, biological, and vessel-speed inputs. The result is a living fouling-risk picture, not a fixed maintenance interval.
It is also the home for your inspection evidence. Every underwater survey — whether flown by Vesselity's ROV service or supplied separately — is stored, analysed, and turned into a report you can act on or hand to class.
- Prioritise the fleet — see which hulls are trending toward a costly fouling state
- Avoid wasted cleaning — don't pay for yard time a hull doesn't yet need
- One source of truth — inspection footage, reports, and history in a single record
- Compliance-ready — supports the case for your CII and efficiency reporting
Platform at a Glance ▾
| Risk Inputs | AIS routing, sea temperature, biological factors, vessel speed |
| Modelling | Advanced ship-profile specifications, per vessel |
| Inspection Data | Content-management system for underwater survey data |
| Image Analysis | AI classification of fouling & surface condition |
| Reporting | Automated, shareable inspection reports |
| Access | Browser-based — whole-fleet overview |
Two Halves of One Platform.
Hull-Sight brings together a fouling-risk analytics engine and a content-management system for inspection data. One looks ahead; the other keeps the record. Together they close the loop between predicting a problem and proving it.
Fouling-Risk Monitoring
Continuous, data-driven monitoring of marine-fouling risk across the fleet — so a hull that is quietly degrading gets flagged before it shows up on the fuel bill.
AIS Routing Analysis
Vessel movement is analysed against sea temperature, biological conditions, and speed — the variables that determine how quickly a hull fouls in practice.
Inspection Data Management
A content-management system for underwater inspection data: store footage, organise findings, and keep a vessel's full inspection history in one place.
AI Image Analysis
Automated analysis of inspection imagery to classify and quantify fouling and surface condition — turning hours of video into structured, comparable data.
Automated Reporting
Generate clean, consistent inspection reports without manual assembly — ready for technical managers, owners, or a classification society.
Fleet-Wide Overview
See the whole fleet at a glance and drill into any vessel. Decide where the next inspection or cleaning should go, on evidence rather than instinct.
Data In. Decisions Out.
Hull-Sight sits quietly in the background, building a picture from data you already generate — and surfacing it the moment a hull starts to drift toward a costly state.
Ingest
Vessel routing (AIS), sea-temperature and biological data, speed, and ship-profile specifications flow into the platform.
Model
The fouling-risk engine combines those inputs into a per-vessel risk score that updates as conditions and operations change.
Inspect & Record
When a survey is warranted, the footage and findings are stored and analysed in the platform — building each hull's history.
Report & Act
Automated reports support the cleaning decision and your compliance record — and feed back to sharpen the next prediction.
Built for the People Who Answer
for Fuel and Compliance.
If hull condition lands on your desk as a cost, a deadline, or an emissions figure, Hull-Sight is built to make that part of the job easier.
Ship Owners
Protect asset value and fuel budgets by acting on fouling before it becomes an expensive, fleet-wide problem.
Fleet & Technical Managers
Plan cleaning and inspection across many vessels with one prioritised view instead of a stack of fixed schedules.
Ferry & Ro-Ro Operators
Keep tight, repeated schedules efficient — small drag gains compound fast on high-frequency routes.
Sustainability & Compliance
Back up CII and efficiency reporting with hull-condition evidence and a defensible cleaning rationale.
From First Contact to Live Dashboard
in Days, Not Months.
Hull-Sight is a cloud platform — there is no hardware to install. Onboarding is fast, and the risk model starts building from the moment the first vessel profile is entered.
Step 1 — Scope Your Fleet
We discuss which vessels to bring in first — typically starting with the two or three that are highest-risk or due for a class survey. No need to commit the whole fleet upfront.
Step 2 — Connect the Data
The platform ingests AIS routing data (automatically from existing feeds), sea-temperature and biological data (external sources), and your vessel-profile specifications. Typically live within a few working days.
Step 3 — See Your First Risk View
Within days you have a per-vessel fouling-risk picture. From here it updates continuously — and each inspection you add, whether via our ROV service or your own, sharpens the model further.
We can run a preliminary risk profile for your fleet from publicly available data — at no cost — so you see what Hull-Sight would show before committing to anything.
Valuable from the First Vessel.
Hull-Sight is designed to pair with Vesselity's inspection service, but it does not require it. On its own, the platform already changes how you manage hull maintenance — turning a guessing game into a prioritised, evidence-backed plan.
Bring your own inspection data, or simply use the fouling-risk view to decide where to send a diver or an ROV next. When you are ready, the full predict-inspect-decide loop is one step away.
Independent, But Connected
The same platform that scores fouling risk also stores and analyses the inspections that confirm it — so adopting the service later means no migration and no lost history.
In Short
Software only: prioritise and document.
Software + service: predict, prove, and improve.
Either way: hull decisions on data, not the calendar.
Request a Demo — Hull-Sight
Book a walkthrough with SepcoTech. We'll show how Hull-Sight models your vessels, where it would save you cleaning and fuel, and how it fits alongside the inspection service.
Territory: SepcoTech is Vesselity's partner for the Nordic and Baltic countries.
Send Us a Message
Fill in the form below and our team will respond within one business day.