Epoxy repair & maintenance solutions

Discover Sepcotech’s Epoxy Solutions for Maritime Equipment

Preventing against: Corrosion, Erosion & Cavatation

  • Immediate Repair & Maintenance solutions

  • Dry Docking, Scrubber & GRE Solutions

  • Supplied in Cartridges - No mixing error, No waste, No pre heating

  • Higher Viscosity - less consumption

  • Customerized Repair solutions

Unigrip Super Guard coating (white) is applied on a steel plate, directly from a spray gun. No manual mixing is needed!

Repair & maintanence solutions

  • Tank coating

  • Cracks and doubler plates

  • End covers

  • Exhaust and bellow repair

  • Flange repair

  • Hatch covers and deck corrosion

  • Hydraulic cylinder pittings

  • Gas systems

  • Ballast and sea water pipes

  • Cable pipes

  • Emergency repairs on pipes

  • Heating coils

  • Pump houses

  • Rudderstock shaft repair

  • Sea chest and strainers

  • Tank holes and pittings

Cases

Case report: Leak repair cargo pipes
Case Report: Leak Repair GRE Ballast Pipes

Step-by-Step Repair

Exhaust system

This kind of solution makes life easier for the crew. It’s quick, doesn’t require special tools, and it gives a result that lasts even under the tough conditions of daily engine operation. By sealing cracks and strengthening worn areas, the exhaust system can keep running safely without interruption. With SepcoTech’s epoxy, maintenance becomes straightforward and reliable – giving ship operators peace of mind that their vessel can stay on course without costly delays.


Epoxy Products

  • UNIGRIP Super Guard - White

    Solvent free, high performance, two-component coating based on epoxy.

    View product

  • UNIGRIP Super Guard - Blue

    Solvent free, high performance, two-component coating based on epoxy.

    View Product

  • UNIGRIP Super Guard - White (Sprayable)

    Solvent free, high-performance, two-component coating based on epoxy.

    View Product

  • UNIGRIP Super Metal Filler Compound

    Epoxy repair compound  for corrosion protection and damage repair of systems subjected to harsh weather conditions and extreme heat.

    View Product

  • UNIGRIP AquaGuard Coating - Red

    High-performance universal Epoxy coating for wet and underwater applications.

    View Product

  • UNIGRIP DuraFix FastSteel Putty stick

    A Universal Epoxy Putty Stick. Heat and chemical resistant. Highly suitable for repair of corroded and worn metals.

    View Product

  • UNIGRIP Exhaust Repair Kit

    Exhaust 1300 °C Kit
    For temporary repair of exhaust systems (pipes, elbows and exspanion joints etc.)

    View Product

  • UNIGRIP Quick Fix Pipe Repair Tape - Small

    A Pre-impregnated, quick curing pipe repair bandage.


    Pipe dia. up to 2 1/2""  (DN75).

    View Product

  • UNIGRIP Quick Fix Pipe Repair Tape - medium

    A Pre-impregnated, quick curing pipe repair bandage.

    Pipe dia up to 5" (DN125)

    View Product

  • UNIGRIP Quick Fix Pipe Repair Tape - large

    A Pre-impregnated, quick curing pipe repair bandage.

    Pipe dia up to 6" to 8" (DN250).

    View Product

  • UNIGRIP Pipe Repair Tape + Putty

    Pipe dia 1/2” to 2 1/2"" (DN20 to DN65) 725 PSI (50 bar)

    View Product

  • UNIGRIP Super Wrap Reinforcement tape - small

    A specially engineered flexible, fiber reinforced bandage for reinforcing corroded pipes or weakned joints. 

    View Product

  • Application Tools

    A mix of application tools, to apply all products.

    View Product

  • UNIGRIP Super Wrap Reinforcement tape - large

    A specially engineered flexible, fiber reinforced bandage for reinforcing corroded pipes or weakned joints. 

    View Product

  • UNIGRIP Aqua Bond Filler Compound

    High-performance, universal epoxy filler compound for wet and underwater applications.

    View Product

  • UNIGRIP Aqua Fix Epoxy Putty Stick

    High-performance universal epoxy putty for wet and underwater applications.

    View Product

Step-by-Step Repair

Pipe wrap

Simple and easy fast curing solution. This product should be on-board every ship for immediate repairs!


Sepcotech scrubber solutions

Our epoxy producs adheres perfectly on GRE pipes!

  • GRE PIPES

    • Clean the area acc. to Sepcotech’s surface preparation

    • Apply one (1) layer of UNIGRIP 101 Super Guard Coating

    • Apply one (1) layer of UNIGRIP Super Wrap and make sure the coating penetrate the “Wrap”

    • Let it semi cure

    • Repeat this procedure until you have 4 layers of “Coating” and 3 layers of “Wrap”

    • Allow curing

  • Overboard Outlet protection

    • Clean the area acc. to Sepcotech’s surface preparation

    • Apply 1 layer of UNIGRIP 101 Super Guard Coating

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Coating

    • Allow curing

  • Overboard Hull Protection

    • Clean the area acc. to Sepcotech’s surface preparation

    • Apply 1st layer of UNIGRIP 101 Super Guard Sprayable Coating

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Sprayable Coating

    • Allow curing

    For further details please contact us

    • We do various solutions inside demister etc.

    For further details please contact us

Scrubber solutions

Dry docking solutions

  • Propeller Blades

    • Clean the area acc. to Sepcotech’s surface preparation

    • Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler

    • Let it semi cure

    • Apply 1st layer of UNIGRIP 101 Super Guard Coating

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Coating

    • Allow curing

    For further details pls. contact us

  • xxxx

    Pros:

    • xx

    • xx.

    Cost Impact: 🔴 High

  • Thruster Gear Housing

    • Clean the area acc. to Sepcotech’s surface preparation

    • Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler

    • Let it semi cure

    • Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Allow curing

    For further details please contact us

  • Item description

  • Cooler End Covers

    Sea Chests & Strainers

    • Clean the area acc. to Sepcotech’s surface preparation

    • Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler

    • Let it semi cure

    • Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Allow curing

    For further details please contact us

  • Sea Chests & Strainers

    • Clean the area acc. to Sepcotech’s surface preparation

    • Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler

    • Let it semi cure

    • Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Make sure that the Flange areas are coated as well

    • Allow curing

    For further details please contact us

  • Sea Water Chests & Strainers

    • Clean the area acc. to Sepcotech’s surface preparation

    • Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler

    • Let it semi cure

    • Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)

    • Allow curing

    For further details please contact us

  • Stern Boss Flange

    • Clean the area acc. to Sepcotech’s surface preparation

    • Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler

    • Let it semi cure

    • Apply 1st layer of UNIGRIP 101 Super Guard Coating

    • Let it semi cure

    • Apply 2nd layer of UNIGRIP 101 Super Guard Coating

    • Allow curing

    For further details please contact us

Quality

MATERIAL SAFETY DATA SHEET

Certificates and other documents