Epoxy repair & maintenance solutions
Discover Sepcotech’s Epoxy Solutions for Maritime Equipment
Preventing against: Corrosion, Erosion & Cavatation
Immediate Repair & Maintenance solutions
Dry Docking, Scrubber & GRE Solutions
Supplied in Cartridges - No mixing error, No waste, No pre heating
Higher Viscosity - less consumption
Customerized Repair solutions
Unigrip Super Guard coating (white) is applied on a steel plate, directly from a spray gun. No manual mixing is needed!
Repair & maintanence solutions
Tank coating
Cracks and doubler plates
End covers
Exhaust and bellow repair
Flange repair
Hatch covers and deck corrosion
Hydraulic cylinder pittings
Gas systems
Ballast and sea water pipes
Cable pipes
Emergency repairs on pipes
Heating coils
Pump houses
Rudderstock shaft repair
Sea chest and strainers
Tank holes and pittings
Cases
Epoxy Products
-
UNIGRIP Super Guard - White
Solvent free, high performance, two-component coating based on epoxy.
-
UNIGRIP Super Guard - Blue
Solvent free, high performance, two-component coating based on epoxy.
-
UNIGRIP Super Guard - White (Sprayable)
Solvent free, high-performance, two-component coating based on epoxy.
-
UNIGRIP Super Metal Filler Compound
Epoxy repair compound for corrosion protection and damage repair of systems subjected to harsh weather conditions and extreme heat.
-
UNIGRIP AquaGuard Coating - Red
High-performance universal Epoxy coating for wet and underwater applications.
-
UNIGRIP DuraFix FastSteel Putty stick
A Universal Epoxy Putty Stick. Heat and chemical resistant. Highly suitable for repair of corroded and worn metals.
-
UNIGRIP Exhaust Repair Kit
Exhaust 1300 °C Kit
For temporary repair of exhaust systems (pipes, elbows and exspanion joints etc.) -
UNIGRIP Quick Fix Pipe Repair Tape - Small
A Pre-impregnated, quick curing pipe repair bandage.
Pipe dia. up to 2 1/2"" (DN75). -
UNIGRIP Quick Fix Pipe Repair Tape - medium
A Pre-impregnated, quick curing pipe repair bandage.
Pipe dia up to 5" (DN125)
-
UNIGRIP Quick Fix Pipe Repair Tape - large
A Pre-impregnated, quick curing pipe repair bandage.
Pipe dia up to 6" to 8" (DN250).
-
UNIGRIP Pipe Repair Tape + Putty
Pipe dia 1/2” to 2 1/2"" (DN20 to DN65) 725 PSI (50 bar)
-
UNIGRIP Super Wrap Reinforcement tape - small
A specially engineered flexible, fiber reinforced bandage for reinforcing corroded pipes or weakned joints.
-
Application Tools
A mix of application tools, to apply all products.
-
UNIGRIP Super Wrap Reinforcement tape - large
A specially engineered flexible, fiber reinforced bandage for reinforcing corroded pipes or weakned joints.
-
UNIGRIP Aqua Bond Filler Compound
High-performance, universal epoxy filler compound for wet and underwater applications.
-
UNIGRIP Aqua Fix Epoxy Putty Stick
High-performance universal epoxy putty for wet and underwater applications.
Sepcotech scrubber solutions
Our epoxy producs adheres perfectly on GRE pipes!
-
GRE PIPES
Clean the area acc. to Sepcotech’s surface preparation
Apply one (1) layer of UNIGRIP 101 Super Guard Coating
Apply one (1) layer of UNIGRIP Super Wrap and make sure the coating penetrate the “Wrap”
Let it semi cure
Repeat this procedure until you have 4 layers of “Coating” and 3 layers of “Wrap”
Allow curing
-
Overboard Outlet protection
Clean the area acc. to Sepcotech’s surface preparation
Apply 1 layer of UNIGRIP 101 Super Guard Coating
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Coating
Allow curing
-
Overboard Hull Protection
Clean the area acc. to Sepcotech’s surface preparation
Apply 1st layer of UNIGRIP 101 Super Guard Sprayable Coating
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Sprayable Coating
Allow curing
For further details please contact us
-
We do various solutions inside demister etc.
For further details please contact us
Dry docking solutions
-
Propeller Blades
Clean the area acc. to Sepcotech’s surface preparation
Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler
Let it semi cure
Apply 1st layer of UNIGRIP 101 Super Guard Coating
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Coating
Allow curing
For further details pls. contact us
-
xxxx
Pros:
xx
xx.
Cost Impact: 🔴 High
-
Thruster Gear Housing
Clean the area acc. to Sepcotech’s surface preparation
Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler
Let it semi cure
Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)
Allow curing
For further details please contact us
-
-
Item description
-
Cooler End Covers
Sea Chests & Strainers
Clean the area acc. to Sepcotech’s surface preparation
Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler
Let it semi cure
Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)
Allow curing
For further details please contact us
-
Sea Chests & Strainers
Clean the area acc. to Sepcotech’s surface preparation
Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler
Let it semi cure
Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)
Make sure that the Flange areas are coated as well
Allow curing
For further details please contact us
-
Sea Water Chests & Strainers
Clean the area acc. to Sepcotech’s surface preparation
Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler
Let it semi cure
Apply 1st layer of UNIGRIP 101 Super Guard Coating (200 micron)
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Coating (200 micron)
Allow curing
For further details please contact us
-
Stern Boss Flange
Clean the area acc. to Sepcotech’s surface preparation
Build up the sureface with Sepcotech UNIGRIP 201 Super Metal Filler
Let it semi cure
Apply 1st layer of UNIGRIP 101 Super Guard Coating
Let it semi cure
Apply 2nd layer of UNIGRIP 101 Super Guard Coating
Allow curing
For further details please contact us
Quality
