FIFISH E-GO — Professional Operational AI Underwater ROV
Industrial AI ROV · E Series
QYSEA's next-generation operational AI underwater robot — Ring-Wing propulsion, Q-STEADY 3.0 self-stabilisation and the full E-Series AI software suite in a compact, highly modular platform with 9-second accessory swaps. Advanced. Adaptable. Built to work.
The E-GO in the Field
Inspect · Measure · Map · Navigate
Full industrial AI capability in a platform you can carry
The FIFISH E-GO is QYSEA's most accessible industrial-class ROV — bringing the complete E-Series AI software suite into a compact, highly modular platform. Built around a pressure-resistant aluminium housing with a biomimetic tail fin, it delivers professional inspection capability to 100 m (200 m optional), with 9-second accessory swaps that keep operations moving.
- Ring-Wing propulsion — +30% power vs V6 EXPERT · 6 metal wing propellers
- Q-STEADY 3.0 — latest-generation AI self-stabilisation
- QY-MT AI measurement · QY-BT bathymetric mapping · Q-DVL station lock
- AI Diver Tracking · AI Visual Station Lock · AI dehazing & image enhancement
- 9-second accessory swap · up to 6 simultaneous tools · 5 kg underwater payload
- 1/1.8" CMOS · 4K/30fps · RAW · 10,000-lumen 4-LED system
The problems the E-GO was built to solve
Professional underwater work demands precision, reach and fast turnaround — without the cost and risk of crewed survey operations. The E-GO is engineered around exactly those constraints.
💰 Slow Mobilisation
Reconfiguring conventional ROVs eats into dive windows. The E-GO swaps any accessory in roughly 9 seconds — reconfigure between dives, not between days.
⚠ Diver Risk
Currents, confined spaces and low-visibility water carry real risk. The E-GO keeps people out of the water for inspection, search and survey.
🌊 Current & Drift
Weaker ROVs lose station in flow. Ring-Wing thrust and Q-DVL station lock hold a precise 3D position for steady close-up work.
📐 Low Precision
Visual-only inspection isn't measurable. QY-MT delivers AR-ruler measurement to within 1 cm, documented and repeatable.
Ring-Wing Propulsion — 30% More Power
The E-GO uses the same Ring-Wing motor architecture as the flagship E-MASTER — delivering a 30% power increase over the FIFISH V6 EXPERT through six metal wing propellers arranged for maximum efficiency.
More thrust, more control, in tougher water
Six high-performance metal wing propellers with expanded blade area are arranged in a ring configuration around the central axis. The geometry maximises the volume of water each thruster accelerates and smooths thrust across all axes — giving the E-GO 30% more total thrust than the V6 EXPERT at equivalent power, with metal construction that resists the flex fatigue of plastic designs.
- Holds station in stronger currents and tows heavier payloads
- 360° six-degree-of-freedom omnidirectional control
- Metal propellers built for professional continuous-use cycles
Q-STEADY 3.0 — Latest-Generation Self-Stabilisation
QYSEA's most advanced stabilisation system combines electronic image stabilisation, AI visual station lock and adaptive flow response into a single seamless control layer — so the pilot can focus on the task, not on holding position.
Electronic Image Stabilisation
Real-time correction driven by the onboard IMU compensates for thruster vibration, tether pulses and turbulence before they reach the recorded footage — smooth, report-quality imagery in active conditions.
AI Visual Station Lock
Tap any subject in the live feed and the AI vision lock tracks and centres it automatically, holding the framing as ROV and subject move — single-touch, no constant manual correction during close-up work.
Adaptive Flow Response
Q-STEADY 3.0 continuously reads current conditions and adapts the thruster response profile in real time — the ROV feels more planted and predictable across a wider range of conditions than earlier generations.
Depth Lock
Pressure-sensor depth lock holds the ROV at a fixed depth while the pilot controls horizontal movement — essential for consistent survey passes and structure traversal.
Posture Lock
Lock the body attitude at any angle — level, tilted or angled to a surface — so the pilot focuses on positioning without the ROV drifting back to a default orientation.
Auto-Cruise · Predefined Paths
Programme survey routes or inspection transects in advance and let the E-GO execute them autonomously — consistent, repeatable coverage that reduces pilot workload.
Q-DVL Station Lock & Smart Navigation
Sonar-based Doppler velocity logging keeps the E-GO precisely positioned in three dimensions — the pilot holds a fixed station while the flight controller counteracts current drift, avoids obstacles and holds altitude automatically.
Hold a precise position for steady, measurable work
The Q-DVL measures the ROV's velocity against the water and the seabed, so the flight controller can lock a precise hover for close-range inspection and QY-MT measurement — exactly where weaker ROVs drift off target. It is the foundation for collision avoidance, altitude lock and repeatable survey passes.
- Station lock hovering — precise 3D position hold without GPS
- Smart collision avoidance — proximity alerts and auto-brake
- Altitude & distance lock — constant height or standoff from target
- Optional 4D Distance Lock Module for enhanced spatial awareness
Precise Manoeuvring
Six-degree-of-freedom control with Ring-Wing thrust — fine, omnidirectional movement for close-tolerance inspection.
Hot-Swap Battery (In Air)
Alternate a depleted battery for a charged one on deck without powering down the system — in air, not while submerged.
Fast Mobilisation
Compact, modular and quick to pack — deploy from small vessels, jetties and shoreline sites without heavy support gear.
Full AI Software Suite
The E-GO carries the complete QYSEA AI software ecosystem — the same suite found in the E-MASTER — delivering precision measurement, bathymetric mapping, autonomous station holding and intelligent tracking in a single platform.
QY-MT — Smart Measurement Tool
AI-powered non-contact measurement directly from the live camera feed. Quantify crack widths, corrosion areas, structural gaps and object dimensions — with an AR ruler accurate to within 1 cm — in real time or during post-dive review.
- AR Ruler with up to 1 cm accuracy, overlaid on live video
- AR area measurement of defects and features
- Multi-angle measurement capability
- Real-time measurement during the dive or offline on recorded footage
- Results exportable for inspection reports and engineering documentation
QY-BT — Bathymetric Survey Tool
Automated 2D and 3D seafloor topographic mapping during normal inspection dives — generating survey deliverables without a separate survey vessel or specialist mapping ROV.
- Automated 2D / 3D seafloor map generation
- Customisable survey area and resolution
- Reservoir and basin volume / capacity estimation
- Single-click data report generation
- Standard export formats for GIS and engineering tools
Q-DVL — Doppler Velocity Log Station Lock
Sonar-based velocity measurement keeps the E-GO precisely positioned in three dimensions — the pilot holds station and focuses on inspection, measurement or manipulation while the flight controller counteracts current drift automatically.
- Station lock hovering — precise 3D position hold without GPS
- Smart collision avoidance — proximity alerts and auto-brake
- Altitude lock — maintain constant height above seabed
- Distance lock — maintain consistent standoff from a target surface
AI Vision & Tracking Systems
The E-GO's AI vision systems automate target tracking, image-quality enhancement and biological monitoring — with fish counting and detection among the AI capabilities QYSEA lists for the platform.
- AI Visual Station Lock — single-touch subject lock and auto-tracking
- AI Diver Tracking — identify and autonomously follow a working diver
- AI dehazing algorithm — real-time image clarity in turbid water
- AI underwater image enhancement — colour correction and contrast
- AI fish detection & counting for biological monitoring
Over-the-Air (OTA) Updates
The E-GO's software capabilities expand through OTA firmware updates — new AI functions are delivered directly to existing hardware, so your ROV becomes more capable over its operational life without hardware changes.
Professional 4K Imaging & 10,000-Lumen Lighting
Engineered for industrial inspection documentation — a large sensor, wide panoramic view, extreme close focus and powerful four-LED illumination across the full field of view.
See more, in worse water, in finer detail
A large 1/1.8-inch CMOS sensor captures 4K/30fps video and RAW stills, with a 176° super-wide surface view and 146° underwater panoramic perspective. Focus as close as 10 cm for welds, corrosion and coating defects — and AI dehazing keeps the subject clear even as sediment drifts through the frame.
1/1.8" CMOS · 4K/30fps
A large-format sensor gathers maximum light in the reduced-illumination deep environment, recording 4K detail for defensible inspection documentation — including RAW stills.
176° / 146° Dual FOV
176° super-wide surface view for situational awareness on descent; 146° underwater panoramic to capture full pipe diameters, walls and structural spans in single frames.
10 cm Macro Focus
Focus as close as 10 cm for detailed close-ups of welds, corrosion pitting, crack propagation, fouling and coating defects.
10,000-Lumen · 4 LEDs
Four independent LED modules deliver 10,000 lumens across a 160° field of view, at three adjustable intensity levels for varying proximity and water clarity.
Modular Architecture — 9-Second Accessory Swap
Field configuration changes should never hold up operations. Every accessory connects and disconnects in seconds; every major component is field-replaceable without specialist tools.
Reconfigure between dives, not between days
A standardised quick-release interface lets a trained operator install or remove any payload in roughly 9 seconds. Two 69.12 Wh batteries deliver 2.5+ hours of operational time and are hot-swappable in air — alternate a depleted unit on deck without shutting the system down, then redeploy with a fresh pack. 90% charge in 50 minutes keeps spares ready.
⚠ Note: Hot-swap battery replacement is supported in air environments only — not while the ROV is submerged. Plan battery rotations between dives accordingly.
9-Second Accessory Swap
The standardised quick-release interface lets an experienced operator install or remove any payload in approximately 9 seconds — reconfigure in the time it takes to discuss the next task.
Up to 6 Tools · 5 kg Payload
With an expansion dock the E-GO carries up to 6 operational tools at once and a 5 kg underwater payload — sonar, sensors, samplers and a robotic arm in a single mission profile.
Integrated Aluminium Housing
A pressure-, corrosion- and crystallisation-resistant aluminium core tank with a biomimetic tail fin reduces drag and withstands the loads of repeated professional deployment better than polymer housings.
A Versatile Underwater Workhorse
The E-GO's combination of AI intelligence, compact form, 9-second tool swaps and a broad sonar accessory range makes it a versatile choice across professional inspection, monitoring and survey work.
Bridge & Infrastructure Inspection
Survey piles, abutments, culverts and civil structures to 100 m. QY-MT documents measurable defects; QY-BT maps seabed conditions; side-scan sonar reveals scour and buried utilities.
Emergency Search & Rescue
Fast deployment, sonar coverage and AI target tracking make the E-GO effective in time-critical search. Scanning sonar finds targets in zero-visibility water; the retrieval hook handles recovery.
Law Enforcement & Public Safety
Underwater evidence search, vehicle and weapon recovery, and forensic documentation. QY-MT provides measurement data for evidence records, deployable from small police and coast-guard vessels.
Water Resources Management
Inspect reservoir floors, dam walls, intakes and outlets. QY-BT generates reservoir volume data alongside structural inspection in a single dive.
Aquaculture & Fisheries
Net-cage inspection, in-situ net patching, mooring assessment and water-quality measurement across pen arrays — with AI fish counting for stock monitoring.
Harbour & Port Infrastructure
Survey jetties, pontoons, harbour walls, seawalls, hulls and marina structures to 100 m — with measurable QY-MT documentation and environmental data in the same deployment.
E-GO vs E-MASTER — Which Is Right for You?
Both E-Series ROVs carry the full AI software suite. The key differences are depth rating, payload capacity and operational profile — the E-GO for accessible, versatile work; the E-MASTER for deep, heavy-payload commercial operations.
Compatible Accessories & Payloads
The E-GO supports one of the broadest accessory ranges in the FIFISH lineup — including sonar systems not available on the V Series. Up to 6 tools can be mounted simultaneously with an expansion dock.
2D Image Sonar
Full sonar imaging for zero-visibility and turbid-water operation — navigate and inspect when the camera cannot see.
360° Scanning Sonar
Full-sphere acoustic scan for structural mapping and obstacle detection in confined or complex environments.
Side-Scan Sonar
Wide-swath seabed imaging for search operations, wreck location, cable route survey and seabed characterisation.
Q-Camera
Secondary inspection camera for simultaneous alternative viewing angles during close inspection work.
AR Ruler (up to 1 cm)
Augmented-reality ruler overlaid on live video — measure dimensions without touching the subject.
4D Distance Lock Module
Multi-dimensional spatial awareness — lock distance and altitude simultaneously for precise standoff inspection.
U-QPS Underwater GPS
Real-time position tracking with POI labelling — geo-reference all inspection findings.
Station Lock Module (Mini DVL)
Add-on DVL for enhanced station-holding performance in more demanding current conditions.
Robotic Arm
Retrieve, move and recover objects, collect specimens and manipulate equipment and fittings.
Water / Mud Samplers
Collect water samples (to 350 m, 500 mL) and bottom sediment for laboratory and contamination analysis.
Water Quality Sensors
4-in-1 sensor (temperature, conductivity, dissolved oxygen, pH) plus a dedicated pH sensor.
Electric-Powered Spool
Motorised tether management — controlled deployment and retrieval to reduce drag and tangles.
Beyond the QYSEA range, the E-GO's payload interface also integrates compatible third-party sonar and USBL positioning, such as Cerulean Sonar's Omniscan 450 and ROV Locator — ask us to confirm integration for your configuration.
Q-iRC — Industrial Remote Controller
Command with power, deliver with precision. A 7-inch 1,500-nit sunlight-readable display, 8 programmable smart keys and up to 8 hours of battery in a ruggedised handheld unit.
Key Specifications
| Display | 7" Full HD |
| Brightness | 1,500 nits |
| Battery Life | Up to 8 hours |
| Smart Keys | 8 programmable |
| Processor | Next-gen octa-core |
| Connectivity | USB-C/A · Ethernet · Wi-Fi · HDMI |
☀ Glare-Free in Direct Sunlight
1,500 nits peak brightness — fully readable on deck in bright daylight, no tent or shade required.
🏻 8 Programmable Smart Keys
One-tap collision avoidance, sonar view, positioning map, diver tracking and multi-window switching — configured for your mission.
📡 Real-Time Multi-Screen
Live camera, sonar, bathymetric map, sensor data and heading unified on one display for faster decisions.
Full Specifications
Performance & Physical ▾
| Maximum Depth | 100 metres (standard) · 200 metres (optional) |
| Maximum Speed | 3 knots |
| Payload Capacity | 5 kg (underwater) |
| Max Attachment Ports | Up to 6 (with expansion dock) |
| Accessory Swap Time | ~9 seconds (experienced operator) |
| Degrees of Freedom | 6 DOF — 360° omnidirectional |
| Housing Material | Integrated aluminium · pressure, corrosion & crystallisation resistant |
| Design | Biomimetic tail fin |
Camera & Imaging ▾
| Camera Sensor | 1/1.8" CMOS |
| Video Resolution | 4K / 30fps |
| Photo Format | RAW |
| Surface FOV | 176° (super-wide) |
| Underwater FOV | 146° (panoramic) |
| Minimum Focus | 10 cm macro |
| AI Image Enhancement | Dehazing · colour correction · contrast |
Lighting ▾
| Total Output | 10,000 lumens |
| LED Modules | 4 independent modules (3,000 lm each) |
| Beam / Field of View | 160° |
| Intensity Levels | 3 adjustable levels |
Propulsion ▾
| Motor System | Ring-Wing — 6 metal wing propellers |
| Power vs V6 EXPERT | +30% thrust |
| Max Speed | 3 knots |
Stabilisation & Navigation ▾
| Stabilisation System | Q-STEADY 3.0 — AI adaptive flow response |
| Station Lock | Q-DVL — Doppler Velocity Log |
| Collision Avoidance | ✓ Smart sonar-based |
| Altitude Lock | ✓ |
| Depth Lock | ✓ |
| Posture Lock | ✓ |
| Auto-Cruise | ✓ — predefined path execution |
| AI Visual Station Lock | ✓ — single-touch subject tracking |
| AI Diver Tracking | ✓ |
AI Software Modules ▾
| QY-MT | AI measurement · AR ruler (up to 1 cm) · AR area · multi-angle |
| QY-BT | 2D/3D bathymetric mapping · volume estimation · auto-report |
| Q-DVL | Station lock · collision avoidance · altitude & distance lock |
| AI Vision | Visual Station Lock · Diver Tracking · dehazing · image enhancement |
| AI Fish Counting | ✓ — detection & counting |
| OTA Updates | ✓ — new capabilities delivered over-the-air |
Power System ▾
| Battery Configuration | Dual 69.12 Wh (hot-swappable in air) |
| Operational Duration | 2.5+ hours |
| Charge Time | 50 minutes to 90% |
| Battery Swap | No power-down — in air, not while submerged |
Specification Sheets & Brochures
Download the official QYSEA FIFISH E-GO documentation — technical specifications and product brochure — sourced directly from QYSEA.
Request FIFISH E-GO Pricing
Tell us about your inspection requirements and we will prepare a personalised EUR quote — including the accessories and sonar configuration recommended for your specific missions.
Request a Quote — FIFISH E-GO
Describe your application and we will recommend the right E-GO accessory configuration for your missions.