EcoQuip · GrindLazer · LazerVac Blast, Grind & Clear the Dust, On One Page
LazerVac - dust collector
Clean, dry, properly profiled steel - the whole surface-prep chain from Graco in one place. EcoQuip 2 vapour-abrasive blasting (ATEX, up to 92% less dust), the handheld GrindLazer scarifiers for spot work, and the LazerVac 330 to clear the dust before recoating. Pick your model, see the IMPA code, add the exact part to your quote.
✓SepcoTech is an Authorised Distributor and represents the manufacturer
Clear the dust before the next coat
The LazerVac dust collector, with the figures from this page pinned to its parts. Hover or tap a number to trace it.
- 01FilterTool-less changeOSHA-compliant filtration; dual paddles knock debris off as you work.
- 02PlugEU · IT · CH · DKRegional variants 26B003 / 26B004 / 26B005 / 26B006.
- 03Canister75 litres20 gal collection capacity.
- 04Motor3.0 hp230V electric, 1665 air watts.
- 05Inlet175 l/sec375 cfm air flow at 186.8 mmHg (100" water) vacuum. Pairs with the GrindLazer vacuum port.
Every Blaster, Scarifier, Collector & Consumable
Pick the package or configuration on a card, and the exact part number and IMPA reference travel straight to your quote. Filter by blasting, grinding or dust, or search for a model. Quote the code on ShipServ (TN 317548) and we'll match it exactly.
EcoQuip 2 EQp Vapour Blasting 2 models · 2 quick-pick cards
Portable, ATEX vapour-abrasive blasting that cuts airborne dust up to 92% versus dry blasting. Choose the nozzle and blast-hose size; add the wear kits and hoses alongside.
EcoQuip 2 EQp - ATEX Low Flow
EcoQuip 2 EQp - ATEX High Flow
Key specifications
| Specification | ATEX Low Flow | ATEX High Flow |
|---|---|---|
| Nozzle | #5 | #6 |
| Blast hose | 1/2 in × 15 m | 1 in × 15 m |
| Pot capacity | 57 litres (2 ft³) | 57 litres (2 ft³) |
| Max compressed air | 8.5 m³/min (300 cfm) | 8.5 m³/min (300 cfm) |
| Max blast pressure | 10.3 bar (150 psi) | 10.3 bar (150 psi) |
| Weight | 99.8 kg (220 lb) | 99.8 kg (220 lb) |
| Graco P/N | 278861 | 278862 |
| IMPA code | 590816 | 590817 |
| Manual | 3A4802 | 3A4802 |
Abrasive guide
Abrasives for vapour blasting should be non-ferrous, heavier than water and not soluble in it. As a rule, use the finest abrasive that still achieves the required profile.
| Abrasive | #20/40 (coarse) | #30/60 | #80 (fine) |
|---|---|---|---|
| Garnet | 70–110 µm | 50–80 µm | 30–60 µm |
| Copper slag | 60–100 µm | 45–70 µm | 25–50 µm |
| Crushed glass | 55–75 µm | 35–50 µm | 15–30 µm |
Profile (Ry5) per ISO 8503/1, based on optimal setup; results vary with local parameters. Large abrasives are recommended only when mixed with smaller sizes such as #30/60 or #20/40.
Features
- Small & portable at 99.8 kg - no fixed rig
- Up to 92% less airborne dust than dry blasting
- ATEX approved for all vessel types, including tankers
- Less vibration and dust - lower operator health risk
- Uses less abrasive and less water - no large slurry mess
Downloads
- EcoQuip 2 EQp brochure (PDF) →
- Operation & repair-parts manual 3A4802 on request
GrindLazer Handheld 2 models · 2 quick-pick cards
The rugged, compact choice for small onboard prep - drum (DC21 E) for edging and rotary (RC71 E) for area, on horizontal and vertical surfaces. Add the matched cutter drums and rebuild kits alongside.
GrindLazer Standard DC21 E - drum
GrindLazer Standard RC71 E - rotary
Key specifications
| Specification | DC21 E (drum) | RC71 E (rotary) |
|---|---|---|
| Cutter type | Drum | Rotary |
| Max working width | 5 cm (2") | 17.5 cm (7") |
| Cutter drum diameter | 10 cm (4") | 10 cm (4") |
| Motor | 230V Makita | 230V Makita |
| Max cut rate | 10 m²/hr (100 ft²/hr) | 10 m²/hr (100 ft²/hr) |
| Vacuum port | Yes | Yes |
| Graco P/N | 25N391 | 25N392 |
| Manual | 3A5575 | 3A5575 |
Cutter drum guide
| Cutter style | Best for | Profiles |
|---|---|---|
| Carbide Flail (supplied) | General coating removal, laitance, light prep | Fine · Medium · Coarse |
| Steel Star | Epoxy & corrosion on steel | Fine · Medium |
| Carbide Star | Aggressive, hard-coating removal | Fine · Medium |
Fully-assembled drums and rebuild kits are available for both the DC21 E and RC71 E. See repair manual 3A5575 for cutter-stacking recommendations.
Applications
- Easy touch-ups & edging
- Removal of renders and coatings from steel
- Hard-to-reach areas, horizontal & vertical surfaces
- Profiling steel for the next coating
LazerVac 330 Dust Collector 1 model · 1 quick-pick card
Clear all dust before recoating - OSHA-compliant filtration, a tool-less filter change and self-cleaning dual paddles. Choose your regional plug variant and stock the filter, bags and hoses.
LazerVac 330 - by region
Key specifications
| Specification | LazerVac 330 |
|---|---|
| Air flow | 175 l/sec (375 cfm) |
| Air power | 1665 air watts |
| Vacuum pressure | 186.8 mmHg (100" water) |
| Capacity | 75 litres (20 gal) |
| Motor | 230V electric (3.0 hp) |
| Filtration | OSHA-compliant; tool-less change; dual paddles |
| Graco P/N | 26B003 / 26B004 / 26B005 / 26B006 |
| Manual | 3A5576 |
Regional plug variants: 26B003 (EU) · 26B004 (IT) · 26B005 (CH) · 26B006 (DK).
Features
- More uptime - tool-less filter change-out on the job
- Safer jobsites - OSHA-compliant filtration removes dust from the air
- Reduced filter clogging - dual paddles knock debris off as you work
- Pairs with the GrindLazer vacuum port and clears dust after EcoQuip
Downloads
- Graco marine catalogue (PDF) →
- Operation manual 3A5576 on request
Clean, dry, properly profiled - the whole chain
Proper surface preparation is essential to the adhesion of any coating: the surface must be left clean, dry, properly profiled and sound. Graco covers the full chain on board - strip large areas of coating and corrosion with the portable, ATEX EcoQuip 2™ vapour blaster, which knocks airborne dust down by up to 92% versus dry blasting; handle edging, touch-ups and hard-to-reach spots with the handheld GrindLazer™ scarifiers; then clear all residual dust with the OSHA-compliant LazerVac™ 330 before the next coat goes on.
- EcoQuip vapour blasting - up to 92% less dust, ATEX, portable at 99.8 kg
- GrindLazer handheld drum & rotary scarifiers for small onboard prep
- LazerVac 330 - OSHA-compliant filtration, tool-less filter change
- Uses less abrasive and less water - simple containment and clean-up
EcoQuip 2 Vapour Blasting on Board
Graco's marine footage of the EcoQuip 2 vapour-abrasive blasting system at work, with up to 92% less dust.
Video published by Graco Inc. SepcoTech is an Authorised Distributor and represents the manufacturer.
Build Your Quote
Your selected equipment and consumables appear below automatically. Send everything in one request.
Quote Request Sent!
Thank you. Your selected items are on their way to the SepcoTech team. We'll respond within one business day.