Home/Industries/Commercial Shipping
Industry · Commercial ShippingSurvey the hull at anchorage, not in dry dock.
Fleet operators have to balance inspection compliance against vessel uptime, and drydock-dependent surveys cost both. In-water hull survey, hatch-cover testing, tank inspection and in-place repair are the four places where that trade-off can actually be improved.
Every inspection competes with the trading schedule
Class requirements do not move, charter parties do not wait, and the cost of a day off-hire dwarfs the cost of most equipment. Almost every decision on a commercial vessel is that arithmetic.
Dry dock is the most expensive place to find out
A survey that requires docking turns a condition question into a scheduling problem. Knowing the hull, propeller and anode condition while the vessel is still trading changes what you can plan for.
Wet cargo is cheaper to prevent than to argue about
Hatch-cover and watertight-integrity failures produce claims that are large, slow and difficult to defend. The test that would have caught it costs a fraction of the deductible.
Fouling is a cost you are already paying
Hull and propeller condition drive fuel consumption continuously, not at intervals. Measuring it is what turns cleaning and coating from a calendar decision into an economic one.
Four jobs on a trading vessel
These are what fleet and technical superintendents come to us for. Everything below serves one of them.
In-water hull survey (UWILD)
Hull condition, biofouling assessment and anode checks performed at anchorage rather than in dock, with video streamed to shore teams in real time.
Propeller, rudder & anchor chain
Visual condition of the running gear and ground tackle - the components whose deterioration shows up as fuel burn and as detention risk.
Hatch cover & watertight integrity
Ultrasonic tightness testing that finds the actual leak path, rather than a hose test that tells you only that water got in somewhere.
Tank, pipework & steel repair
Cold-cure epoxy repair of corroded pipework, tanks, coolers and cylinders - in place, frequently without taking the system offline.
How each job is done, and with what
Where more than one of our brands suits a task, all of them are named.
Hull & vessel inspection
UWILD hull surveys, biofouling assessment, anode condition checks, propeller and rudder inspection - performed at anchorage without drydocking. Real-time video can be streamed to remote technical teams via cloud platforms, so the surveyor does not have to be at the quayside.
Cargo & watertight integrity
Ultrasonic hatch-cover tightness testing locates the leak path itself, and the same instrument family covers watertight door and compartment integrity. This is the test that stands behind a wet-cargo claim - or prevents one.
In-place repair & protection
Cold-cure epoxy for ballast and seawater pipes, tank pitting, cooler end covers, hydraulic cylinder pitting, exhaust systems and hatch-cover corrosion. No hot work permit, no pre-heating, and it bonds to GRE pipe as well as steel.
Which inspection platform suits your fleet
The deciding factors are usually who will operate it, whether it has to live aboard, and whether the output needs to satisfy a class surveyor.
If crew will operate it
Blueye X-series
Built for single non-specialist operator deployment, with structured reporting tools aimed at inspection records rather than raw footage. The straightforward choice for a vessel-based programme.
Blueye platforms →
If you need measurement
QYSEA FIFISH
Six degrees of freedom with smart measurement tooling for non-contact millimetre-level corrosion and dimensional data - useful where the survey has to quantify, not just show.
QYSEA platforms →
If the issue is above the waterline
Coltraco ultrasonics
Hatch covers, watertight doors and suppression cylinders. Instruments rather than vehicles - and often the faster answer to a cargo-damage question.
Coltraco instruments →Documented deployments of the systems we supply
Reported by the manufacturer and the operator - not our own project work.

Routine commercial hull checks without contracted divers
The challenge
Frequent hull inspection of visiting commercial vessels - checking for foreign objects and contraband attached below the waterline - while depending on contracted dive services for every single check.
The result
Norwegian Customs deploys Blueye ROVs for frequent commercial vessel hull checks, eliminating dependence on contracted dive services. The capability moved in-house, and inspection frequency stopped being limited by contractor availability.
Source: Blueye Robotics deployment documentation. Outcomes are as reported by the manufacturer and the operator.

Nineteen ballast tank inspections in two days
The challenge
Ballast tank inspection at a scale that would traditionally require confined-space entry, rope access or staged dewatering - multiplied across nineteen tanks.
The result
Noble Drilling completed nineteen ballast tank inspections in two days using Blueye ROVs. No confined-space entry was required for the survey itself, which removes the permit and standby burden as well as the time.
Source: Blueye Robotics deployment documentation.
The other four things a fleet buys from us
Inspection is one column of the catalogue. On a commercial vessel these come up just as often.
Hull performance
Measure fouling and propeller condition, coat the niche areas, and route around the weather - the three levers on the same fuel bill.
Vessel Performance →Fire safety compliance
Suppression-system testing at SOLAS intervals, and EV fire containment for car carriers and ferries.
Fire Safety →Surface preparation
Deck and tank scaling with the vibration exposure figures that decide what a crew can safely use for a full shift.
Surface-prep tools →Provisions & air
UV-C and ozone treatment for cold stores and provision rooms, so stores last the voyage rather than the first leg.
Onboard Air →Commercial inspection providers
Contractors and survey companies buy this equipment for a different reason: to widen what they can offer and to cut the personnel a job requires.
Multi-industry deployment
One platform covering shipping, ports, aquaculture and civil infrastructure rather than a vehicle per sector.
Digital-first reporting
Structured records with timestamped video and annotated findings - deliverables clients can file rather than footage they have to interpret.
Class-certified data collection
Where the survey has to be submitted, the data-collection method matters as much as the finding. Confirm the specifics with your surveyor.
Remote expert review
Live streaming lets a specialist assess condition during the dive instead of reading a report days afterwards.
What fleet operators usually ask first
Can ROV inspection data be used for class society submissions?
In the right configuration, yes. Some systems in our portfolio are class-certified for visual inspection and NDT data collection, and automated reporting tools generate structured records used in UWILD programmes - underwater inspection in lieu of dry-docking. The important caveat: requirements vary between class societies and by vessel, so always confirm the specific requirement with your surveyor before planning the programme. We will tell you which systems meet which certification rather than implying they all do.
Can the crew operate it, or do we need a specialist?
The crew. Modern compact ROVs are designed for single non-specialist operator deployment, and coastguard crews, customs officers and researchers routinely operate them without ROV pilot training. Deployment is typically three to five minutes from setup to water entry.
Do we buy one per vessel, or share across the fleet?
Both models work and the arithmetic depends on inspection frequency and trading pattern. A shared unit that travels with a superintendent suits a fleet on long voyages; a vessel-based unit suits frequent short calls where a condition question can arise at any port. Renting first is the cheapest way to find out which you actually have. See the rental fleet.
Tell us the vessel and the problem
Vessel type, what you need to inspect or repair, and whether it has to satisfy class. We will recommend across the brands we carry rather than pushing one - including saying when the cheaper option is the right one.
Thank you - that's with us.
We will come back to you within one working day. If it is urgent, call +45 6916 2400.