Diver system SONADIVE The whole mission in hand.
SONADIVE in a diver's hands
A portable sonar and navigation system that puts detection, navigation and underwater comms into the diver's hands. Built for EOD and MCM teams, SONADIVE turns a single diver into a connected, self-locating mine hunter - for safe and covered MCM operations.
✓SepcoTech is an authorised RTsys distributor
A diver who can see, navigate and talk - alone in zero visibility.
An MCM diver works in the worst conditions in the sea: low light, strong current, a target that may be live, and no GPS the moment the head goes under. SONADIVE bundles the three things that keep that diver effective and safe - detection, navigation and communication - into one console small enough to carry by hand, with a magnetic signature low enough to work right up against magnetic-influence mines.
- 01Hand grips20 kgOne console small enough to carry by hand. Max depth 100 m.
- 02Sonar imageBlueView multibeam450 kHz, with 900 / 2250 kHz options.
- 03Display12" backlitUnderwater-optimised for turbid, low-light water.
- 04Console270 × 372 × 560 mmLowest magnetic signature on the market. 6 h autonomy, wet-pluggable batteries.
See the target before you touch it
SONADIVE integrates a BlueView multibeam imaging sonar (450 kHz, with 900/2250 kHz options) behind a 12-inch backlit display tuned for readability in turbid, low-light water. The diver acquires a contact on sonar at stand-off range, then closes in and confirms it - classifying mine from clutter without guesswork.
The whole console is engineered for the lowest magnetic signature on the market, so the diver can work close to magnetic-influence ordnance that would trigger on conventional kit.
Always know where you are - and where the mine is
A fused GPS / INS / DVL (1200 kHz) navigation suite keeps the diver located even after the last surface fix is lost beneath the waterline. Search patterns are run accurately, contacts are pinned to a precise position, and the diver can return to a marked target on demand.
Positions are not just held - they are shared, so every diver, vehicle and the surface supervisor see the same picture of the seabed and each other.
Text, position and navigation data - through the water
SONADIVE carries real-time acoustic messaging: divers exchange text, share positions and pass navigation data without surfacing or breaking cover. Two devices stay linked over 2.2 km; with RTsys relay beacons the link extends to around 5 km.
That turns a set of isolated divers into one coordinated MCM team - and lets the surface stay covertly in the loop the whole time.
SONADIVE specifications
Indicative configuration - final specification confirmed at quotation. Contact SepcoTech for the current datasheet.
- System typeDiver-held sonar & navigation
- Primary roleEOD / MCM diver operations
- Display12″ backlit, underwater-optimised
- SonarBlueView multibeam (450 / 900 / 2250 kHz)
- DVL1200 kHz
- NavigationGPS + INS + DVL (fused)
- CommunicationsAcoustic text, position & nav-data
- Comms range (device-to-device)2.2 km
- Comms range (via relay beacons)~5 km
- Magnetic signatureLowest on the market
- Max depth100 m
- Autonomy6 h, wet-pluggable batteries
- Weight20 kg
- Dimensions (H×W×L)270 × 372 × 560 mm
- Topside pairingSurface Communication Module (SCM)
- Network roleLinked by underwater acoustics
One node in a wider MCM team
SONADIVE is not a stand-alone tool - it is a teaming node. It works with COMET-MCM AUVs, the Surface Communication Module and positioning beacons, all linked by underwater acoustics, so the diver inherits the survey work the vehicles did first and stays located by the wider team.
Built for the MCM diver's hardest tasks
Harbour Threat Search
Re-acquiring and classifying contacts around port infrastructure and anchorages where conditions are murky and clutter is dense.
See the MCM suite →
Coastal UXO Clearance
Locating and identifying legacy ordnance in shallow approaches - the densest UXO problem in European waters.
See the MCM suite →
Diver / AUV Re-Acquisition
Diving to contacts the COMET-MCM flagged on its survey lines, with the AUV holding station as a positioning beacon.
Explore the COMET-MCM →A safe pair of hands for defence at sea
Authorised Distributor
We represent RTsys directly - specification, supply and through-life support, coordinated from Denmark.
Naval & EOD Focus
A portfolio assembled for navies, coast guards and EOD units - not adapted from civilian kit.
One Point of Contact
Multi-supplier defence systems, integrated and quoted as a single package by one partner.
Backed Through Life
Training, spares and support for the full operational life of the system.
Ready to scope your requirement?
Request a briefing, a datasheet or a quotation - direct and in confidence.
Speak directly with our defence specialist
Every enquiry is handled directly and in confidence - you will normally have a reply within one business day.
For spec sheets, capability documents, pricing or to arrange a briefing or demonstration - on this system or any platform in the SepcoTech defence portfolio - contact me directly:
- Spec sheets & technical datasheets on request
- Briefings & demonstrations for units & agencies