Home/Industries/Aquaculture
Industry · AquacultureStop sending divers down to look at a net.
Net inspection, fish welfare and environmental compliance are now routine ROV work on modern farms - daily rather than quarterly, logged automatically, and without a dive team on the schedule. We carry five robotics brands used in aquaculture, so the recommendation depends on your cages, not on our stock.
Three pressures pulling in opposite directions
Fish farms face rising expectations on welfare standards, escape prevention and environmental reporting - while operating costs have to come down, not up. Diver-dependent inspection is where those three collide.
Net damage is a financial and regulatory event
An undetected tear becomes an escape, and an escape becomes a reportable incident with a cost attached. Detection frequency is the whole game - quarterly inspection cannot catch what happened last week.
You cannot manage what you only see at harvest
Stocking density, mortality, feeding behaviour and water quality all need observation rather than inference. Getting eyes in the cage daily changes what decisions are even available.
Reporting demands evidence, not assurance
Benthic condition beneath cages and environmental data increasingly have to be demonstrated. Manual documentation is the part that quietly consumes the most staff time.
Four jobs on a working farm
These are the tasks farms use robotics for day to day. Everything further down this page exists to serve one of them.
Daily net & cage inspection
All cage surfaces, mooring lines and anchor systems - frequently enough that damage is found before it becomes an escape.
Fish health & mortality monitoring
Real-time observation, mortality detection and retrieval, feeding-system inspection and stocking-density assessment.
Water quality sensing
pH, dissolved oxygen, salinity, turbidity and temperature - the environmental context that makes health data interpretable.
Mooring & feeding-system inspection
Structural checks on the parts of the installation that are expensive to fail and invisible from the walkway.
How each job is done, and with what
Where more than one of our brands suits a task, all of them are named. That is the point of carrying five.
Net & cage inspection
Regular net damage detection prevents fish escapes - a major financial and regulatory risk. ROVs enable daily visual inspection of all cage surfaces, mooring lines and anchor systems. AI-assisted net damage detection flags issues automatically for faster response.
Fish welfare & mortality monitoring
Real-time fish health observation, mortality detection and retrieval, feeding system inspection and stocking density assessment. Water quality sensors measure pH, dissolved oxygen, salinity, turbidity and temperature - providing environmental context for the health data.
Which platform suits which farm
The right answer depends on cage depth, whether you need to do something as well as see it, and how much of the inspection you want automated. Three genuinely different starting points.
If you want simple and daily
Blueye X1
Purpose-designed for fish farm use - compact, quick to deploy, with a gripper attachment and water quality sensors. Built to be operated by farm staff rather than an ROV pilot.
Blueye platforms →
If you need to intervene
Seamor Steelhead
The heavier-duty option, with dual-grip manipulator capability for net repair support and mooring recovery work. Modular, so third-party sensors can be added for environmental monitoring.
Seamor platforms →
If you run a large operation
QYSEA E-GO
AI-assisted net damage detection and remote operation capability - aimed at farms with enough sites that inspection has to scale without adding headcount at each one.
QYSEA platforms →Documented deployments of the systems we supply
Reported by the manufacturer and the operator - not our own project work.

Salmon farm net inspection without diver dependency
The challenge
MOWI West on Vancouver Island - part of a British Columbia aquaculture sector supplying over 50,000 tonnes annually - needed regular net and cage inspection to prevent fish escapes and meet regulatory requirements, without depending on dive operations to do it.
The result
A Seamor Steelhead ROV with dual-grip manipulator was deployed for net inspection, repair support and mooring assessment. Diver operations were reduced, and full modular compatibility with third-party sensors allowed environmental monitoring to be integrated into the same programme.
Source: Seamor Marine deployment documentation. Figures and outcomes are as reported by the manufacturer and the operator.
Robotics is not the only thing a farm needs from us
A marine installation is steel, coatings and pipework as well as cages. These are the other parts of the catalogue that come up on aquaculture sites.
Cold-cure repair
Corrosion and erosion on mooring hardware, walkways, pipework and steel structure - repaired in place, without heat.
Epoxy Solutions →Surface preparation
Getting rust and failed coating off before recoating - with vibration exposure figures that decide what a crew can actually use all day.
Surface-prep tools →Sensors & payloads
Water quality sensors, positioning, grippers and lights - what turns a vehicle into a monitoring programme.
Sensors & payloads →Sonar
For turbid sites where cameras stop being useful - imaging sonar, altimeters and acoustic tracking.
Sonar & positioning →What farms usually ask first
Which ROV is best for aquaculture inspection?
Several are suited to it, and they are genuinely different. The Blueye X1 is purpose-designed for fish farm use - compact, easy to deploy, with a gripper attachment and water quality sensors. The Seamor Steelhead is the heavy-duty option with manipulator capability for net repair and recovery work. QYSEA's E-GO offers AI-assisted net damage detection and remote operation for larger farming operations. The right choice depends on cage depth, whether you need payload capability, and whether you want automated or manual piloting.
Can farm staff operate one, or do we need an ROV pilot?
Farm staff. Modern compact ROVs are designed for single non-specialist operator deployment, and fish farm operators, university researchers and coastguard crews routinely run these systems without dedicated ROV pilot training. That is the difference that makes daily inspection realistic rather than aspirational.
How quickly can one be in the water?
Leading compact ROVs deploy in three to five minutes from setup to water entry, typically with a one or two person team. For routine cage rounds that means the inspection fits inside an existing shift rather than requiring a mobilisation.
What depth do we need?
For most aquaculture work, 100–300 m is more than sufficient. Entry-level systems reach 100–200 m, mid-range professional systems 200–305 m, and advanced systems 350 m and beyond. Cage depth and any adjacent survey work are what set the requirement - there is no advantage in paying for depth you will not use.
Can we try one before committing?
Yes. Systems are available for short-term hire with worldwide mobilisation, so a platform can be proven on your own cages, in your own water clarity and with your own staff before any capital is committed. See the rental fleet.
Not sure which system fits your cages?
Tell us the site - cage depth, water clarity, how often you want to inspect, and whether you need to repair as well as look. We will recommend across the five brands rather than pushing one, and we will say if the cheaper platform is the right one.
Thank you - that's with us.
We will come back to you within one working day. If it is urgent, call +45 6916 2400.
